a) | |
b) | |
c) |
1) | |
2) | |
3) | |
4) | |
5) | |
6) | |
7) | |
8) | |
9) | |
10) | |
11) | |
12) | |
13) | |
14) | |
15) | |
16) | |
17) | |
18) | |
19) | |
20) | |
21) | |
22) | |
23) | |
24) | |
25) | |
26) | |
27) | |
28) | |
29) | |
30) | |
31) | |
32) | |
33) | |
34) | |
35) | |
36) | |
37) | |
38) | |
39) | |
40) | |
41) |
[1] | P. Bauer, J.Dudak, D.Maga: Distance practical education with DelftWebLab. |
In: Proceedings of EPE-PEMC 2006, Portoroz, August 30 - September 1, ISBN 1-4244-0121-6, pp.1528-1535 | |
[2] | D.Maga, J.Sitár, J.Dudák: Measurement of Electrical Machines in Virtual Laboratory. |
10th International Symposium on Mechatronics, Mechatronika 2007, Trencianske Teplice Slovakia, 6-8 June 2007, ISBN 978-80-807-210-1 | |
[3] | P.Bauer, D.Maga, J.Sitar, J.Dudak, R.Hartansky: PEMCWebLab-Distance practical education for Power Electronics and |
Electrical Drives. 38th Annual IEEE Power Electronics Specialists Conference Power Electronics Education Workshop (PEEW07) | |
[4] | P.Bauer, V.Fedak, V.Hajek: Remote Controlled Practical Education for Power Electronics and Electrical Drives. |
Proceedings SEFI (European Society for Engineering Education) and IGIP (International Society for Engineering Education) Annual Conference 2007, Publisher University of Miskolc, 2007, ISBN 978-963-661-772-1 | |
[5] | P.Bauer, V.Fedak: Distance Laboratories in Electrical Engineering. |
International conference EDPE Stara Lesna Slovakia, September, 2007, ISBN 978-8073-867-9 | |
[6] | P.Bauer, V.Staudt: Remote controlled practical education for Power Electronics. |
12th European Conference on Power Electronics and Applications, 2-5 September 2007 Aarlborg, ISBN 978-90-7581-510-8 | |
[7] | P.Bauer, V.Fedak: Implementation of E-Learning Platform for Distance Practical Education in EE. |
ICETA 2007, 5th Int. Conference on Emerging E-learning Technologies and Applications, The High Tatras, Slovakia, 6-8 September 2007, pp. 189-193. ISBN 978-80-8086-061-5 | |
[8] | P.Bauer, V.Fedak, V. Hajek: Practical Application of E-Learning in Electrical Engineering. |
Innovations 2007, Chapter in the book, Innovations 2007 - World Innovations in Engineering Education and Research | |
[9] | R.Hartansky, D.Maga: New Trends in Education at Department of Mechatronic Systems of FM TnUAD. |
In KOPES 2007. Brno: UO Brno, 2007. pp. 43 - 45. ISBN 978-80-7231-252-8 | |
[10] | D.Sobczuk: “Internet Based Teaching of Pulse Width Modulation for Three-Level Converters”. |
In: Proceedings of EUROCON 2007, Warsaw, Poland, 9-12 September 2007 | |
[11] | D.Sobczuk: “E-Learning Presentation Of Pulse Width Modulation Methods for Two and Three-Level”. |
International conference EDPE, Stara Lesna, Slovakia, September, 2007 | |
[12] | D.Hercog, B.Gergic, S.Uran, K.Jezernik: “A DSP-based Remote Control Laboratory IEEE Transaction on Converters”. |
Industrial Electronics, vol. 54, no. 6, pp. 3057-3068, 2007 | |
[13] | S.Uran, D.Hercog, K.Jezernik: “Remote Control Laboratory with Moodle Booking System”. |
In Proceedings of the IEEE International Symposium on Industrial Electronics (ISIE), 2007, pp. 2978-2983 | |
[14] | Rojko, Andreja, Hercog, Darko, Debevc, Matjaž. Combining remote and local laboratory in mechatronics control course. |
V: International scientific and practical conference E-learning in higher school - problems and perspectives (INCEL-08) | |
Odessa, Ukraine, May 13-15, 2008. Kharkiv: National Technical Unversity, 2008 | |
[15] | Viliam Fedák, Tibor Balogh, Pavol Bauer, Štefan Juško: Virtual and remote experimentation in motion control, |
Conference Mechatronika Trencin 2008, AD University of Trencín, Faculty of Mechatronics, ISBN 978-80-8075-305-4 | |
[16] | Jan Sitar, Vladimir Racek, Dusan Maga, Juraj Dudak, Rene Hartansky, Peter Siroky and Pavol Bauer |
Distance Laboratory of Electromechanical Actuators Measurement, Conference Mechatronika Trencin 2008, | |
AD University of Trencín, Faculty of Mechatronics, ISBN 978-80-8075-305-4 | |
[17] | Pavol Bauer, Viliam Fedak, Vitezslav Hajek, Ioannis Lampropoulos: Survey of Distance Laboratories in Power Electronics, |
IEEE 39th Annual Power Electronics Specialists Conference, ISBN 978-1-4244-1668-4 | |
[18] | Rojko Andreja, Hercog Darko, Jezernik Karel: Design of mechatronics course for international collaborative remote laboratory, |
International Conference REV 2007, Remote Engineering & Virtual Engineering, June 23-25, Düsseldorf, Germany, 2008 | |
[19] | P.Bauer, J.Dudak: Technology of Distance measurements and monitoring, International conference for Power Electronics |
Intelligent Motion Power Quality, PCIM 2007, Mesago PCIM GmbH, Stuttgart, 22-24 May 2007 | |
[20] | Maga, D., Sitar, J., Dudak, J., Hartansky, R., Siroky, P., Halgos, J., Bauer, P.: Electromechanical Actuators Web-Lab, |
Proceedings of 13th EPE-PEMC. [Poznan]: [Ptetis Publshers], 2008. pp. 2399-2401, ISBN 978-1-4244-1742-1 | |
[21] | Andreja Rojko, Darko Hercog and Karel Jezernik: Educational Aspects of Mechatronic Control Course Design for Collaborative |
Remote Laboratory, 13th International Power Electronics and Motion Control Conference (EPE-PEMC 2008), 1-3 September 2008, Poznan, IEEE Catalog Number: CFP0834A-CDR, ISBN: 978-1-4244-1742-1 | |
[22] | Pavol Bauer, Viliam Fedák and Otto Rompelman: PEMCWebLab — Distance and Virtual Laboratories in Electrical Engineering: |
Development and Trends, 13th International Power Electronics and Motion Control Conference (EPE-PEMC 2008), | |
1-3 September 2008, Poznan, IEEE Catalog Number: CFP0834A-CDR, ISBN: 978-1-4244-1742-1 | |
[23] | Volker Staudt, Andreas Steimel, Pavol Bauer and Vítezslav Hájek: Power Quality and Active Filters as Web-Controlled Experiment |
in the Frame of PEMC WebLab, 13th International Power Electronics and Motion Control Conference (EPE-PEMC 2008), | |
1-3 September 2008, Poznan, IEEE Catalog Number: CFP0834A-CDR, ISBN: 978-1-4244-1742-1 | |
[24] | Dariusz Sobczuk and Bartlomiej Kamiski: Distant Learning of Pulse Width Modulation Techniques for Voltage Source Converters; |
13th International Power Electronics and Motion Control Conference (EPE-PEMC 2008), 1-3 September 2008, Poznan, | |
IEEE Catalog Number: CFP0834A-CDR, ISBN: 978-1-4244-1742-1 | |
[25] | BAUER, Pavol – FEDÁK, Viliam – GRIJPING, Kalinka: Application of Elearning in Electrical Engineering. Plenary paper. |
6th Int. Conf. on Emerging Telecommunications Technologies and Applications, ICETA 2008, The High Tatras, 2008, | |
pp. 7-15, ISBN 978-80-8086-089-9 | |
[26] | P.Bauer: Distance Laboratory for Teaching Power Electronics – Part II DC-AC, COMPEL 2008, Eleventh IEEE Workshop on |
Control and Modeling for Power Electronics, Zurich August 2008, IEEE Catalog Number CFP08COM-USB, ISBN 978-1-4244-2551-8 | |
[27] | T.M.Wolbank, P.Bauer, P.Macheiner, M.Vogelsberger: Distance Laboratory for Teaching Industrial Electronics. |
34th Annual Conference of the IEEE Industrial Electronics Society (IECON 2008), 10-13 November 2008, Orlando, Florida, U.S.A. ISBN: 978-1-4244-1766-7 | |
[28] | G.Sziebig, P.Korondi, Z.Suto, P.Stumpf, R.K.Jardan, I.Nagy: Integrated E-learning Projects in the European Union. |
34th Annual Conference of the IEEE Industrial Electronics Society (IECON 2008), 10-13 November 2008, Orlando, Florida, U.S.A. ISBN: 978-1-4244-1766-7 | |
[29] | K.Jezernik, A.Rojko, D.Hercog: Experimentally Oriented Remote Motion Control Course for Mechatronic Students. |
34th Annual Conference of the IEEE Industrial Electronics Society (IECON 2008), 10-13 November 2008, Orlando, Florida, U.S.A. ISBN: 978-1-4244-1766-7 | |
[30] | R.HUZLIK, H.KUCHYNKOVA, P.KUCERA: Power Electrical Virtual Laboratory in Brno University of Technology. |
In ISEM 2008 - XVI. International Symposium on Electric Machinery. Praha: CVUT Praha, 2008. s. 60-287. ISBN: 978-80-01-04172-7 | |
[31] | R.HUZLIK, H.KUCHYNKOVA, P.KUCERA: Virtual Laboratory of Power Electrical in BUT. |
In International conference on "Low Voltage Electrical Machines". VUT: VUT Brno, 2008. s. 1-148. ISBN: 978-80-214-3795-1 |
Place, Country: | Portoroz, Slovenia |
Date and Time: | 2-4 September, 2006 |
Organiser (institution): | EPE-PEMC |
Presented by: | J.Dudak, TU Trencin |
Number of participants: | 50 present at the presentation |
Participating Countries: | 60 countries all over the world |
Presented Paper: P.Bauer, J.Dudak, D.Maga: Distance practical education with DelftWebLab;
EPE-PEMC 2006, Portoroz, August 30- September 1, ISBN 1-4244-0121-6, pp.1528-1535
Target group(s): Visitors of the International Conference Exhibition. Conference is visited by people from the academics industry from the Europe and overseas.
Other relevant information:EPE-PEMC is the largest International Conference for Power Electronics and Motion Control; the aerea of power electronics, electrical machines, intelligent motion. This is the area in which most of the Edipe modules are designed. Dissemination was performed during special session dedicated to education
Place, Country: | Brno & Radešín, Czech Republic |
Date and Time: | 23. 1. – 25. 1. 2007 |
Organiser (institution): | FVT UO Brno |
Presented by: | D. Maga, R. Hartanský |
Number of participants: | 37 |
Participating Countries: | 2 |
Presented Paper: HARTANSKY, R., MAGA, D. New Trends in Education at Department of Mechatronic Systems of FM TnUAD. In KOPES 2007. Brno: UO Brno, 2007. pp. 43 - 45. ISBN 978-80-7231-252-8.
Target group(s): University lectures from electrical/electrotechnical oriented universities from Czech and Slovak Republic.
Place, Country: | Nurnberg, Germany |
Date and Time: | 22-24 May 2007 |
Organiser (institution): | Messago |
Presented by: | P.Bauer, TUD |
Number of participants: | 500 participants |
Participating Countries: | 40 countries all over the world |
Presented Paper: P.Bauer, J.Dudak: Technology of Distance measurements and monitoring, International conference for Power Electronics Intelligent Motion Power Quality, PCIM 2007, Mesago PCIM GmbH, Stuttgart, 22-24 May 2007
Target group(s): Visitors of the International Conference Exhibition. Conference is visited by people from the academics industry from the Europe and overseas.
Other relevant information:PCIM is the largest International Exhibition for Power Electronics and Motion Control; the aerea of power electronics, electrical machines, intelligent motion. This is the area in which most of the Edipe modules are designed. Dissemination was performed during paper presentation. During the presentation the participationg institutions are introduced and technology of distance mesurements explained.
Place, Country: | Trencianske Teplice, Slovakia |
Date and Time: | 6-8 June, 2007 |
Organiser (institution): | 10th International Symposium on Mechatronics |
Presented by: | J.Dudak, TU Trencin |
Number of participants: | 50 present at the presentation |
Participating Countries: | 5 countries |
Presented Paper: D.Maga, J.Sitár, J.Dudák: Measurement of Electrical Machines in Virtual Laboratory, 10th International Symposium on Mechatronics, Trencianske Teplice, Slovakia, June 6-8, 2007, ISBN 978-80-807-210-1
Target group(s): Visitors of the International Conference Conference is visited by people from the academics and industry from Slovakia and Central Europe.
Other relevant information: n.a.
Place, Country: | Orlando, USA |
Date and Time: | 16 June, 2007 |
Organiser (institution): | IEEE PELS |
Presented by: | P. Bauer, TU Delft |
Number of participants: | 20 present at the Power Electronics Education Workshop |
Participating Countries: | 60 countries all over the world, 500 participants |
Presented Paper: P.Bauer, D.Maga, J.Sitar, J.Dudak, R.Hartansky: PEMCWebLab - Distance Practical Education for Power Electronics and Electrical Drives, 38th Annual IEEE Power Electronics Specialists Conference Power Electronics Education Workshop (PEEW07).
Target group(s): Visitors of the International Conference. Conference is visited by people from the academics industry from the Europe and overseas.
Other relevant information:PESC is an IEEE PELS conferenceThis is the area in which most of the Edipe modules are designed. Dissemination was performed during a workshop PEEW. During the presentation the participationg institutions are introduced and technology of distance mesurements explained.
Place, Country: | Aalborg, Denmark |
Date and Time: | 4-6 September, 2007 |
Organiser (institution): | EPE Association |
Presented by: | P. Bauer, TU Delft |
Number of participants: | 900 present at the presentation |
Participating Countries: | 60 countries all over the world |
Presented Paper: P. Bauer, V. Staudt: Remote Controlled Practical Education for Power Electronics, 12th European Conference on Power Electronics and Applications, 2-5 September 2007, Aarlborg, ISBN 978-90-7581-510-8.
Target group(s): Visitors of the International Conference Exhibition. Conference is visited by people from the academics industry from the Europe and overseas.
Other relevant information:European Power Electronics conference covers the area of Power electronics and electrical Drives. This is the area in which most of the Edipe modules are designed. Dissemination was performed during a poster session dedicated to education. During the presentation the participationg institutions are introduced and technology of distance mesurements explained.
Place, Country: | Aalborg, Denmark |
Date and Time: | 4-6 September, 2007 |
Organiser (institution): | EPE Association |
Presented by: | P. Bauer, TU Delft |
Number of participants: | 900 present at the presentation |
Participating Countries: | 60 countries all over the world |
Presented Paper: Presentation óf the project during panel discussion Education
Target group(s): Visitors of the International Conference Exhibition. Conference is visited by people from the academics industry from the Europe and overseas.
Other relevant information:European Power Electronics conference covers the area of Power electronics and electrical Drives. This is the area in which most of the Edipe modules are designed. Dissemination was performed during a poster session dedicated to education/ During the presentation the participationg institutions are introduced and technology of distance mesurements explained.
Place, Country: | Miskolc, Hungary |
Date and Time: | 2007 |
Organiser (institution): | SEFI |
Presented by: | V. Fedák, FEI TUKE |
Number of participants: | 60 present at the presentation |
Participating Countries: | 25 countries all over the world |
Presented Paper: P.Bauer, V.Fedak, V.Hajek: Remote Controlled Practical Education for Power Electronics and Electrical Drives, Proceedings SEFI (European Society for Engineering Education) and IGIP (International Society for Engineering Education) Annual Conference 2007, Publisher University of Miskolc, 2007, ISBN 978-963-661-772-1
Target group(s): Visitors of the International Conference Exhibition. Conference is visited by people from the academics industry from the Europe and overseas.
Other relevant information: European Power Electronics conference covers the area of Power electronics and electrical Drives. This is the area in which most of the Edipe modules are designed. Dissemination was performed during a poster session dedicated to education. During the presentation the participationg institutions are introduced and technology of distance mesurements explained.
Place, Country: | Vigo, Spain |
Date and Time: | 4-7 June, 2007 |
Organiser (institution): | IEEE Industrial Electronics Society |
Presented by: | K. Jezernik, University of Maribor |
Number of participants: | 20 present at the Special Session "Education in Engineering and Industrial Technologies" |
Participating Countries: | 62 countries all over the world, 610 papers |
Presented Paper: S. Uran, D. Hercog, and K. Jezernik, "Remote Control Laboratory with Moodle Booking System," in Proceedings of the IEEE International Symposium on Industrial Electronics (ISIE), 2007, pp. 2978-2983.
Target group(s): Visitors of the International Symposium on Industrial Electronics. Conference is visited by people from the academics and industry from the Europe and overseas.
Other relevant information: IEEE International Symposium on Industrial Electronics (ISIE) is one of the largest International symposium for Industrial Electronics and Motion Control. Dissemination was performed during paper presentation. During the presentation the participating institutions are introduced and technology of distance laboratories explained.
Place, Country: | Stará Lesná, Slovakia |
Date and Time: | 6-8 September, 2007 |
Organiser (institution): | elfa s.r.o, Košice |
Presented by: | Pavol Bauer |
Number of participants: | |
Participating Countries: |
Presented Paper: P.Bauer, V.Fedak: Implementation of E-Learning Platform for Distance Practical Education in EE, ICETA 2007, 5th Int. Conference on Emerging e-learning Technologies and Applications, The High Tatras, Slovakia, September 6-8, 2007, pp. 189-193. ISBN 978-80-8086-061-5
Other relevant information: ICETA is International Conference on Emerging eLearning Technologies and Applications; the area of international projects of innovative teaching and eLearning, national and European qualifications framework, revitalization of higher education and promotion of industry-university collaboration. Dissemination was performed during plenary session.
Place, Country: | Warsaw, Poland |
Date and Time: | 9-12 September, 2007 |
Organiser (institution): | IEEE, Warsaw University of Technology |
Presented by: | D. Sobczuk |
Number of participants: | 400 present at the presentation |
Participating Countries: | 40 countries all over the world |
Presented Paper: D.Sobczuk: Internet Based Teaching of Pulse Width Modulation for Three-Level Converters; EUROCON 2007, Warsaw, Poland, 9-12 September 2007
Target group(s): Visitors of the International Conference Exhibition. Conference is visited by people from the academics industry from the Europe and overseas.
Other relevant information: This conference will include a great variety of educational, professional and social activities, overview of IEEE activities and services, as well as opportunities for establishing new and maintaining old contacts among professionals. Dissemination was performed during a poster session dedicated to education/ During the presentation the distance learning of PWM modulation was explained.
Place, Country: | Wuppertal, Germany |
Date and Time: | 18 September, 2007 |
Organiser (institution): | University of Wuppertal |
Presented by: | S. Menzner |
Number of participants: | 50 present at the presentation |
Participating Countries: | Germany |
Presented Paper: Power Quality and Active Filters in the PEMCWebLab Frame.
Target group(s): Power Electronics specialistst from North Rhine Westphalia.
Other relevant information: Target of this meeting is to inform Power Electronics specialists (mostly from academia) about research projects. The presentation of PEMCWebLab caused very high interest, many questions were asked concerning PEMCWebLab in general, not only directly after the contribution, but also during coffee breaks. The idea of the internet based power electronics and motion control experiments received extremely positive attention. A regular paper does not exist, a PowerPoint presentation in German language was basis of the presentation.
Place, Country: | Stara Lesna, Slovakia |
Date and Time: | 24-26 September, 2007 |
Organiser (institution): | FEI TUKE, SES, FER, Korema |
Presented by: | V. Fedák, FEI TUKE |
Number of participants: | 120 present at the presentation |
Participating Countries: | 12 countries all over the world |
Presented Paper: P.Bauer, V.Fedak: Distance Laboratories in Electrical Engineering; International conference EDPE Stara Lesna Slovakia, September, 2007, ISBN 978-8073-867-9
Target group(s): Visitors of the International Conference Exhibition. Conference is visited by people from the academics industry from the Europe and overseas.
Other relevant information: European Power Electronics conference covers the area of Power electronics and electrical Drives. This is the area in which most of the Edipe modules are designed. Dissemination was performed during a poster session dedicated to education. During the presentation the participationg institutions are introduced and technology of distance mesurements explained.
Place, Country: | Stara Lesna, Slovakia |
Date and Time: | 24-26 September, 2007 |
Organiser (institution): | FEI TUKE, SES, FER, Korema |
Presented by: | D. Sobczuk |
Number of participants: | 120 present at the presentation |
Participating Countries: | 12 countries all over the world |
Presented Paper: D. Sobczuk: E-Learning Presentation of Pulse Width Modulation Methods for Two and Three-Level Converters; International conference EDPE Stara Lesna Slovakia, September, 2007.
Target group(s): Visitors of the International Conference Exhibition. Conference is visited by people from the academics industry from the Europe and overseas.
Other relevant information:European Power Electronics conference covers the area of Power electronics and electrical Drives. This is the area in which most of the Edipe modules are designed. Dissemination was performed during a poster session dedicated to education. During the presentation the distance learning of PWM modulation was explained.
Journal: | IEEE Transactions on Industrial Electronics |
ISSN: | 0278-0046 |
Title: | A DSP-based Remote Control Laboratory |
Authors: | D. Hercog, B. Gergic, S. Uran and K. Jezernik |
Pub. Date: | December, 2007 |
Volume: | 6 |
Issue: | 54 |
Pages: | 3057- 3068 |
About IEEE Transactions on Industrial Electronics
IEEE Transactions on Industrial Electronics is published bimonthly. Its scope encompasses the applications of electronics, controls and communications, instrumentation and computational intelligence for the enhancement of industrial and manufacturing systems and processes. Included are power electronics and drive control techniques, system control and signal processing, fault detection and diagnosis, power systems, instrumentation, measurement and testing, modeling and simulation, motion control, robotics, sensors and actuators, implementation of neural nets, fuzzy logic, and artificial intelligence in industrial systems, factory automation,communication, and computer networks.
Place, Country: | Bratislava, Slovakia |
Date and Time: | 20-22 February 2008 |
Organiser (institution): | Incheba Expo Bratislava, Slovakia |
Presented by: | Dušan Maga |
Number of participants: | 106 exhibitors, 4800 visitors |
Participating Countries: | 6 (SK, CZ, D, TR, A, PL) |
Form of presentation: | poster at exhibition |
Target group(s): Visitors of the International fair. Fair is visited by people from the academics and industry (especially oriented at electrical engineering and machine industry) from the Europe and overseas.
Other relevant information: Trade fair of new technologies and innovations on machine industry, electrical engineering and chemical industry. Under auspices of Ministry of Social Security, Ministry of Economy. 6500 m2, 106 exhibitors (SK, CZ, D, TR, A, PL), more information: www.incheba.sk
Place, Country: | Odessa, Ukraine |
Date and Time: | May 13-15, 2008 |
Organiser (institution): | |
Presented by: | |
Number of participants: | |
Participating Countries: |
Presented Paper: Rojko, Andreja, Hercog, Darko, Debevc, Matjaž. Combining remote and local laboratory in mechatronics control course. V: International scientific and practical conference E-learning in higher school - problems and perspectives (INCEL-08), Odessa, Ukraine, May 13-15, 2008. Kharkiv: National Technical Unversity, 2008
Place, Country: | Nurnberg, Germany |
Date and Time: | May 22-24, 2008 |
Organiser (institution): | Messago |
Presented by: | P.J.van Duijsen SR, P.Bauer TUD |
Number of participants: | 3000 present at the exhibition |
Participating Countries: | 40 countries all over the world, 3000 participants |
Form of presentation: Exhibition space
Target group(s): Visitors of the International Conference Exhibition. Conference is visited by people from the industry from the Europe and overseas.
Other relevant information:PCIM is the largest International Exhibition for Power Electronics and Motion Control; the aerea of power electronics, electrical machines, intelligent motion. This is the area in which most of the Edipe modules are designed. Dissemination was performed during the exhibition and exhibition space was rented.
Place, Country: | Oradea, Romania |
Date and Time: | 29-30 May, 2008 |
Organiser (institution): | University of Oradea, University Politehnica of Bucharest, Academy of Romanian Scientists Technical Sciences Section |
Presented by: | |
Number of participants: | |
Participating Countries: |
Place, Country: | Trencianske Teplice, Slovakia |
Date and Time: | June 4-6, 2008 |
Organiser (institution): | 11th International Symposium on Mechatronics |
Presented by: | V. Fedak, TU Kosice |
Number of participants: | 50 present at the presentation |
Participating Countries: | 5 countries |
Presented Paper: Viliam Fedák, Tibor Balogh, Pavol Bauer, Štefan Juško:Virtual and remote experimentation in motion control, Conference Mechatronika Trencin 2008, AD University of Trencín, Faculty of Mechatronics, ISBN 978-80-8075-305-4
Target group(s): Visitors of the International Conference Conference is visited by people from the academics and industry from Slovakia and Central Europe.
Other relevant information: n.a.
Place, Country: | Trencianske Teplice, Slovakia |
Date and Time: | June 4-6, 2008 |
Organiser (institution): | 11th International Symposium on Mechatronics |
Presented by: | V. Fedak, TU Kosice |
Number of participants: | 50 present at the presentation |
Participating Countries: | 5 countries |
Presented Paper: Jan Sitar, Vladimir Racek, Dusan Maga, Juraj Dudak, Rene Hartansky, Peter Siroky and Pavol Bauer
Distance Laboratory of Electromechanical Actuators Measurement, Conference Mechatronika Trencin 2008, AD University of Trencín, Faculty of Mechatronics, ISBN 978-80-8075-305-4
Target group(s): Visitors of the International Conference Conference is visited by people from the academics and industry from Slovakia and Central Europe.
Other relevant information:n.a.
Place, Country: | Rhodos, Greece |
Date and Time: | June 17, 2008 |
Organiser (institution): | IEEE PELS |
Presented by: | P.Bauer, TUD |
Number of participants: | 80 present at the Power Electronics Specialists Conference poster presentation |
Participating Countries: | 60 countries all over the world, 750 participants |
Presented Paper: Pavol Bauer, Viliam Fedak, Vitezslav Hajek, Ioannis Lampropoulos: Survey of Distance Laboratories in Power Electronics, IEEE 39th Annual Power Electronics Specialists Conference, ISBN 978-1-4244-1668-4
Target group(s): Visitors of the International Conference. Conference is visited by people from the academics industry from the Europe and overseas.
Other relevant information:PESC is an IEEE PELS conferenceThis is the area in which most of the Edipe modules are designed. Dissemination was performed during the poster session. During the presentation the participationg institutions are introduced and technology of distance mesurements explained.
Place, Country: | Rhodos, Greece |
Date and Time: | June 15-19, 2008 |
Organiser (institution): | IEEE PELS |
Presented by: | P.J.van Duijsen, P.Bauer, TUD |
Number of participants: | 750 present at the Power Electronics Specialists Conference |
Participating Countries: | 60 countries all over the world, 750 participants |
Form of presentation: Exhibition space
Target group(s): Visitors of the International Conference. Conference is visited by people from the academics and industry from the Europe and overseas.
Other relevant information:PESC is an IEEE PELS conferenceThis is the area in which most of the Edipe modules are designed. Dissemination was performed during the exhibition and exhibition space was rented. During the presentation the participationg institutions are introduced and technology of distance mesurements explained.
Place, Country: | Düsseldorf, Germany |
Date and Time: | 23-25 June 2008 |
Organiser (institution): | University of Applied Sciences Düsseldorf, Germany |
Presented by: | Andreja Rojko |
Number of participants: | 120 |
Participating Countries: | 30 |
Form of presentation: | Oral presentation |
Target group(s): Visitors of the International Conference. Conference is visited by people from the academics and industry from the Europe and overseas.
Presented Paper: Rojko Andreja, Hercog, Darko, Jezernik, Karel. Design of mechatronics course for international collaborative remote laboratory, International Conference REV 2008, Remote Engineering & Virtual Engineering, June 23-25, Düsseldorf, Germany, 2008, ISBN 978-3-89958-352-6.
Other relevant information: REV2008 is the fifth in a series of annual events addressing the area of remote engineering and virtual instrumentation. The general objective of this conference is to discuss fundamentals, applications and experiences in the field of online engineering, both in industry and academia.
Place, Country: | Zurich, Switzerland |
Date and Time: | 17-20 August, 2008 |
Organiser (institution): | Swiss Federal Institute of Technology Zurich |
Presented by: | Pavol Bauer |
Number of participants: | 60 |
Participating Countries: | 24 |
Form of presentation: |
Presented Paper: P.Bauer: Distance Laboratory for Teaching Power Electronics – Part II DC-AC, COMPEL 2008, Eleventh IEEE Workshop on Control and Modeling for Power Electronics, Zurich August 2008, IEEE Catalog Number CFP08COM-USB, ISBN 978-1-4244-2551-8
Place, Country: | Poznan, Poland |
Date and Time: | 1-3 September 2008 |
Organiser (institution): | Ptetis Poland, Poznan University of Technology, EPE-PEMC |
Presented by: | Dušan Maga |
Number of participants: | cca 600 (cca 20 present during dissemination) |
Participating Countries: | cca 60 |
Form of presentation: | oral presentation |
Presented Paper: Maga, D., Sitar, J., Dudak, J., Hartansky, R., Siroky, P., Halgos, J., Bauer, P. Electromechanical Actuators Web-Lab. Proceedings of 13th EPE-PEMC. [Poznan]: [Ptetis Publshers], 2008. pp. 2399-2401 ISBN 978-1-4244-1742-1.
Target group(s): Visitors of the International Conference. Conference is visited by people from the academics and industry from the Europe and overseas.
Other relevant information: EPE-PEMC is the largest International Conference for Power Electronics and Motion Control; the area of power electronics, electrical machines, intelligent motion. This is the area in which most of the Edipe modules are designed. Dissemination was performed during special session. Proceeding of the conference is also registered as IEEE catal. Nr. CFP0834A-CDR, Lib of Congress: 2007906910"
Place, Country: | Poznan, Poland |
Date and Time: | 1-3 September 2008 |
Organiser (institution): | Ptetis Poland, Poznan University of Technology, EPE-PEMC |
Presented by: | Andreja Rojko |
Number of participants: | cca 600 (cca 20 present during dissemination) |
Participating Countries: | cca 60 |
Form of presentation: | oral presentation |
Presented Paper: Andreja Rojko, Darko Hercog and Karel Jezernik. Educational Aspects of Mechatronic Control Course Design for Collaborative Remote Laboratory. 13th International Power Electronics and Motion Control Conference (EPE-PEMC 2008), 1-3 September 2008, Poznan, IEEE Catalog Number: CFP0834A-CDR, ISBN: 978-1-4244-1742-1
Target group(s): Visitors of the International Conference. Conference is visited by people from the academics and industry from the Europe and overseas.
Other relevant information: EPE-PEMC is the largest International Conference for Power Electronics and Motion Control; the area of power electronics, electrical machines, intelligent motion. This is the area in which most of the Edipe modules are designed. Dissemination was performed during special session. Proceeding of the conference is also registered as IEEE catal. Nr. CFP0834A-CDR, Lib of Congress: 2007906910"
Place, Country: | Poznan, Poland |
Date and Time: | 1-3 September 2008 |
Organiser (institution): | Ptetis Poland, Poznan University of Technology, EPE-PEMC |
Presented by: | Pavol Bauer |
Number of participants: | cca 600 (cca 20 present during dissemination) |
Participating Countries: | cca 60 |
Form of presentation: | oral presentation |
Presented Paper: Pavol Bauer, Viliam Fedák and Otto Rompelman: PEMCWebLab — Distance and Virtual Laboratories in Electrical Engineering: Development and Trends; 2008 13th International Power Electronics and Motion Control Conference (EPE-PEMC 2008), 1-3 September 2008, Poznan, IEEE Catalog Number: CFP0834A-CDR, ISBN: 978-1-4244-1742-1
Target group(s): Visitors of the International Conference. Conference is visited by people from the academics and industry from the Europe and overseas.
Other relevant information: EPE-PEMC is the largest International Conference for Power Electronics and Motion Control; the area of power electronics, electrical machines, intelligent motion. This is the area in which most of the Edipe modules are designed. Dissemination was performed during special session. Proceeding of the conference is also registered as IEEE catal. Nr. CFP0834A-CDR, Lib of Congress: 2007906910"
Place, Country: | Poznan, Poland |
Date and Time: | 1-3 September 2008 |
Organiser (institution): | Ptetis Poland, Poznan University of Technology, EPE-PEMC |
Presented by: | Volker Staudt |
Number of participants: | cca 600 (cca 20 present during dissemination) |
Participating Countries: | cca 60 |
Form of presentation: | oral presentation |
Presented Paper: Volker Staudt, Andreas Steimel, Pavol Bauer and Vítezslav Hájek: Power Quality and Active Filters as Web-Controlled Experiment in the Frame of PEMC WebLab; 2008 13th International Power Electronics and Motion Control Conference (EPE-PEMC 2008), 1-3 September 2008, Poznan, IEEE Catalog Number: CFP0834A-CDR, ISBN: 978-1-4244-1742-1
Target group(s): Visitors of the International Conference. Conference is visited by people from the academics and industry from the Europe and overseas.
Other relevant information: EPE-PEMC is the largest International Conference for Power Electronics and Motion Control; the area of power electronics, electrical machines, intelligent motion. This is the area in which most of the Edipe modules are designed. Dissemination was performed during special session. Proceeding of the conference is also registered as IEEE catal. Nr. CFP0834A-CDR, Lib of Congress: 2007906910"
Place, Country: | Poznan, Poland |
Date and Time: | 1-3 September 2008 |
Organiser (institution): | Ptetis Poland, Poznan University of Technology, EPE-PEMC |
Presented by: | Darius Szobczuk |
Number of participants: | cca 600 (cca 20 present during dissemination) |
Participating Countries: | cca 60 |
Form of presentation: | oral presentation |
Presented Paper: Dariusz Sobczuk and Bartlomiej Kamiski. Distant Learning of Pulse Width Modulation Techniques for Voltage Source Converters; 2008 13th International Power Electronics and Motion Control Conference (EPE-PEMC 2008), 1-3 September 2008, Poznan, IEEE Catalog Number: CFP0834A-CDR, ISBN: 978-1-4244-1742-1
Target group(s): Visitors of the International Conference. Conference is visited by people from the academics and industry from the Europe and overseas.
Other relevant information: EPE-PEMC is the largest International Conference for Power Electronics and Motion Control; the area of power electronics, electrical machines, intelligent motion. This is the area in which most of the Edipe modules are designed. Dissemination was performed during special session. Proceeding of the conference is also registered as IEEE catal. Nr. CFP0834A-CDR, Lib of Congress: 2007906910"
Place, Country: | Poznan, Poland |
Date and Time: | 1-3 September 2008 |
Organiser (institution): | Ptetis Poland, Poznan University of Technology, EPE-PEMC |
Presented by: | D.Hercog, A. Rojko, P.Bauer |
Number of participants: | cca 600 (cca 20 present during dissemination) |
Participating Countries: | cca 60 |
Form of presentation: | oral presentation |
Form of presentation: Exhibition space
Target group(s): Visitors of the International Conference. Conference is visited by people from the academics and industry from the Europe and overseas.
Other relevant information: EPE-PEMC is the largest International Conference for Power Electronics and Motion Control; the area of power electronics, electrical machines, intelligent motion. This is the area in which most of the Edipe modules are designed. Dissemination was performed during special session. Proceeding of the conference is also registered as IEEE catal. Nr. CFP0834A-CDR, Lib of Congress: 2007906910"
Place, Country: | Stará Lesná, Slovakia |
Date and Time: | 11-13 September, 2008 |
Organiser (institution): | elfa s.r.o, Košice |
Presented by: | Pavol Bauer |
Number of participants: | |
Participating Countries: | |
Form of presentation: |
Presented Paper: Pavol Bauer, Viliam Fedák and Kalinka Grijpink-van den Biggelaar. APPLICATION OF ELEARNING IN ELECTRICAL ENGINEERING; 6th International Conference on Emerging eLearning Technologies and Applications, ICETA, 11-13 September, 2008, Stara Lesna, Slovakia. ISBN 978-80-8086-089-9
Other relevant information: ICETA is International Conference on Emerging eLearning Technologies and Applications; the area of international projects of innovative teaching and eLearning, national and European qualifications framework, revitalization of higher education and promotion of industry-university collaboration. Dissemination was performed during plenary session.
Place, Country: | Zurich, Switzerland |
Date and Time: | 18-20 August, 2008 |
Organiser (institution): | IEEE |
Presented by: | P.Bauer |
Number of participants: | 60 |
Form of presentation: | oral |
Presented Paper: P.Bauer: Distance Laboratory for Teaching Power Electronics – Part II DC-AC, COMPEL 2008, Eleventh IEEE Workshop on Control and Modeling for Power Electronics, Zurich August 2008, IEEE Catalog Number CFP08COM-USB, ISBN 978-1-4244-2551-8
Place, Country: | Romania, Timisoara |
Date and Time: | 25-26 September, 2008 |
Organiser (institution): | |
Presented by: | |
Number of participants: | |
Participating Countries: | |
Form of presentation: |
Presented Paper:
Place, Country: | Orlando, USA |
Date and Time: | 10-13 November 2008 |
Organiser (institution): | IEEE Piscataway |
Presented by: | T.Wolbank |
Number of participants: | 600 |
Participating Countries: | 51 |
Form of presentation: | oral |
Presented Paper: T.M.Wolbank, P.Bauer, P.Macheiner, M.Vogelsberger: Distance Laboratory for Teaching Industrial Electronics. 34th Annual Conference of the IEEE Industrial Electronics Society (IECON 2008), 10-13 November 2008, Orlando, Florida, U.S.A. ISBN: 978-1-4244-1766-7
Place, Country: | Orlando, USA |
Date and Time: | 10-13 November 2008 |
Organiser (institution): | IEEE Piscataway |
Presented by: | R.K.Jardan |
Number of participants: | 600 |
Participating Countries: | 51 |
Form of presentation: | oral |
Presented Paper: G.Sziebig, P.Korondi, Z.Suto, P.Stumpf, R.K.Jardan, I.Nagy: Integrated E-learning Projects in the European Union. 34th Annual Conference of the IEEE Industrial Electronics Society (IECON 2008), 10-13 November 2008, Orlando, Florida, U.S.A. ISBN: 978-1-4244-1766-7
Place, Country: | Orlando, USA |
Date and Time: | 10-13 November 2008 |
Organiser (institution): | IEEE Piscataway |
Presented by: | A.Rojko |
Number of participants: | 600 |
Participating Countries: | 51 |
Form of presentation: | oral |
Presented Paper: K.Jezernik, A.Rojko, D.Hercog: Experimentally Oriented Remote Motion Control Course for Mechatronic Students. 34th Annual Conference of the IEEE Industrial Electronics Society (IECON 2008), 10-13 November 2008, Orlando, Florida, U.S.A. ISBN: 978-1-4244-1766-7
Place, Country: | Budapest, Hungary |
Date and Time: | 14. November 2008 |
Organiser (institution): | Budapest Tech Polytechnical Institution |
Presented by: | D. Maga |
Number of participants: | 100 |
Participating Countries: | 4 |
Form of presentation: | oral |
Presented Paper: D. Maga: Mechatronical Distance WebLab (the proceedings not received yet).
Journal: | The Parliament Magazine |
Title: | European Universities share Laboratories |
Authors: | P.Bauer, V.Hajek |
Pub. Date: | December, 2008 |
Issue: | Special Issue 81 |
Pages: | 16-17 |
About the magazine: The leading publication for all those interested in the work of the European Parliament.
Place, Country: | Prague, Czech Republic |
Date and Time: | 10-11 September, 2008 |
Organiser (institution): | Czech Technical University in Prague |
Presented by: | R. Huzlik |
Number of participants: | |
Participating Countries: | |
Form of presentation: | oral |
Presented Paper: HUZLIK, R.; KUCHYNKOVA, H.; KUCERA, P.: Power Electrical Virtual Laboratory in Brno University of Technology. In ISEM 2008 - XVI. International Symposium on Electric Machinery. Praha: CVUT Praha, 2008. s. 60-287. ISBN: 978-80-01-04172-7
Place, Country: | Šlapanice u Brna, Czech Republic |
Date and Time: | 3-4 November, 2008 |
Organiser (institution): | Brno University of Technology |
Presented by: | P.Bauer, R. Huzlik |
Number of participants: | |
Participating Countries: | |
Form of presentation: | oral |
Presented Paper: HUZLIK, R.; KUCHYNKOVA, H.; KUCERA, P.: Virtual Laboratory of Power Electrical in BUT. In International conference on "Low Voltage Electrical Machines". VUT: VUT Brno, 2008. s. 1-148. ISBN: 978-80-214-3795-1